Now that you know How Do I Stop A decorative fountain from Splashing Over, you are wondering what you should do next. Check your fountain part, as water is flowing, to see how much water is sprayed beyond the edge of the fountain.
If the water is splashing past the edge of the fountain, slide or move the fountain pieces(s) into the radius of the attached pipe restriction, and see if this helps. If it does not, re-adjust the flow-control mechanism to see if some variation in the flow will fix unwanted splashing.
Check your adjustable flow control, because you might have it set too high for your specific fountain, thus making water flow come out too fast and causing the splashing. If your water pump is too low, your fountain cannot work correctly, and may no longer be producing any water flow. Winds can and will blow the water flowing through your fountain parts, which prevents water from being recaptured into your tank. To keep an indoor fountain from splashing, you must tune your pump or fountain to allow a water flow that moves smoothly down your pipework, rather than squirting outward.
If the splashing is less of an issue for you than the damage caused, you may want to treat and waterproof the areas surrounding your water fountain. This way, you can maintain the natural appearance of the water fountain, not having to constantly worry about adapting for changes in the level of the water and other issues that lead to the spilling. A different scenario is changing the sounds of a water fountain that you already purchased some time ago. The fountain’s sound is mostly affected by the style of water fountain that you bought.
The route that water takes to your fountain helps to establish the tone of the feature, not to mention volume levels and the frequency at which you need to refill it. Sometimes, your fountain can cause the water to spray across your floor, which can create an undesirable sound. If your fountain’s water level is too low, and your pump is exposed, the pump will draw in air and create a spattering effect, causing splashing. You need to know that any fountain that you are using is going to have a chance to leak, spill, or splash water.
As evaporation drops water levels, any falling water is likely to splash more frequently (which makes for a nice sound, but it also creates clutter around your fountain). Monitor your water level and refill water, if necessary, to make up for the evaporation and to decrease the amount of splashing. A lot of water will be sprayed out and carried by wind, so expect to be refilling your pool often. Water clinging to the sides of a fountain is not as easy to miss from splashes, but this thin layer vaporizes rapidly in warm weather, so you might need frequent refills.
Water should be about half-full, but no more than 1 1/2 inches. Fill or drain water, and then begin using the fountain. You may even want to leave the fountain unplugged until your pets begin drinking; you may want to plug in the fountain afterward to keep the water cool. One way to check for leaks is to unplug your fountain, fill the reservoir to the very top with water, and see if it drips out within the same time frame that you experienced with the pump connected and the water flowing. Make sure your fountains, both indoor and outdoor, have enough water that covers the whole pump, best to be sure there is 2 inches of water above the pump as well. If adding water does not work, another factor to consider is that the location of the pump might be incorrect, which is what is making the pump vibration.
Another suggestion, if using an indoor waterfall outdoor style, you might want to cut out a screen to put into your fountains reservoir to prevent the water from rebounding out and on to the floor as soon as it falls in the reservoir. The screen will keep the surrounding area safe from splashing, and you will still be able to see your water feature clearly with no distractions from outside.
A possible protection option, if the splashing is still happening, is to build in a splash guard to catch any extra water. Splash guards work by trapping the water beneath their screening material, eliminating 90% or more of splashing common to fountains.
Waterfall-style fountains may allow for upwards splashing, but return movements will be limited to a screen. Pump flow controls may decrease fountain volume and the splashing waste, but the purpose of the style is not to evoke tranquility.
Note that the flow set to this level will create splashes; moving the lever rightwards reduces water flow – minimum, or –(to the right of the lever slots) produces the gentlest flow. Water will always flow down directly, and if a bowl, stadia, or other fountain piece is misaligned, it may cause an awkward flow and increase undesirable splashing.
Running fishlines through your fountain’s plumbing and structure should enhance the water flow and reduce the chances of any possible splashing. If you have a slate-faced in-wall fountain, you may notice some parts of the slab are restricting water flow, a scratch-free scouring pad on the surface of the slabs may work.
To clean the glass, you can use a glass cleaner called Jazz Window Prep. Next, you will probably need to start the water flowing.
If you are experiencing sloshes, there are a couple of things that you can control, such as water level, pump speed, and placement of any rocks or splash bars. You may also want to try finding a shop and buying a splash mat, or you may want to try and find another way to keep dry while near the fountain.
To keep it from happening in the future, use a scale removal product designed specifically for your particular kind of fountain or water feature.